{"product_id":"ladebuchse-kabel-hoverboard-e-scooter-2-polig-44-cm","title":"Charging Socket with Cable for Hoverboard \/ E-Scooter | 2-Pin Wired, 3-Pin Round Socket | 44 cm | Incl. Nut and Ring","description":"\u003ch2\u003eCharging socket with cable for hoverboards, 2-pin wired, 44 cm\u003c\/h2\u003e\n\u003cp\u003eIf the charging plug wobbles, the board only charges under pressure on the plug, or it does not charge at all, the charging socket is usually worn out. This charging socket replaces it: a round panel-mount socket in metal with a screw thread and three contact pins, two of which carry an individually insulated wire each (red\/black), plus 44 cm of cable ending in a white 2-pin connector with a latch. Fit the housing into the hole, add the nut and ring from the box, plug the connector onto the board, done.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eHoverboards and self-balancing boards\u003c\/strong\u003e (6.5, 8 and 10 inch) whose charger has a round plug with three contact pins\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHoverkarts and boards of the same design\u003c\/strong\u003e, where the charging socket connects to the board with a cable ending in a white 2-pin connector\u003c\/li\u003e\n\u003cli\u003eRepairs where the mounting point sits further from the board and needs a longer cable (44 cm instead of 18 cm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlease check before buying: your charger's plug is round with three contact pins, and the old socket on the board connects through a white 2-pin connector. Then this part fits. Also measure the distance from the mounting hole to the board: this version has a 44 cm cable. If a shorter cable is enough on your board, the shop also carries the same socket with an 18 cm cable. It is not intended for boards with a 2-pin DC barrel socket or for Xiaomi e-scooters with their own charging port. The mounting hole in the housing needs about 12 mm.\u003c\/p\u003e\n\u003cp\u003eCompatible replacement part, supplied by Voltes from the Netherlands. Brand names are used only to describe the fit.\u003c\/p\u003e","brand":"VOLTES","offers":[{"title":"Default Title","offer_id":53383561576715,"sku":"7439647282235-V2","price":8.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/5771\/9819\/files\/ladebuchse-mit-kabel-fuer-hoverboard-e-scooter-2-polig-belegt-3-624.webp?v=1790168443","url":"https:\/\/kaufweise.com\/products\/hoverboard-charging-socket-cable-2-pin-44-cm","provider":"Kaufweise","version":"1.0","type":"link"}